Home
Islander 36 Blueprints CD

List of Drawings & 1978 Owner's Manual


This CD was compiled by scanning a set of blueprints owned by Don Schumacher (Blue Streak) who had them scanned into .TIF files. For those interested in construction details, these make an interesting read. They seem to reflect a range of I-36 designs - for example things like the anchor locker and split backstay are not found on early Islanders. Engine & exhaust configurations also changed during the years. There is even a "Freeport" chainplate design that should have been used on the I-36 aft lowers!!

The original prints varied in quality from very clear to poor, and the resulting files mirror this condition. The largest files, the 01. and 02. series, are 10816 x 7507 - very high resolution, which means they look small when viewed as a full page. Detail becomes readable as you zoom in on a given area, but this can be slow due to the large file size. The CD has a Word file called CD Contents which you can print to use as your "Table of Contents" when opening files.

The CD also has a directory with the scanned images of the pages of a 1978 Owner's Manual.

The CD is available free to current members who would like one, and will be sent to New Members as they join. Current members can request their copy on this CD Order From. They will be available for delivery or mailing by the Spring Meeting 2007. Non-members may purchase a copy for $15 - the cost of a whole year's Non-Resident Membership!!!

Number

Description

Number

Description

       

01.01

General Design & Dimensions

03.09

Chainplate Reinforcement plate

01.02

Sail Plan - similar to 01.01

03.10

Exhaust Silencer Assembly

01.03

Top & Side view cut-away general arrangement

03.11

Stern pulpit with ladder

01.04

Sail Plan - similar to 01.01 & 01.02, more details

03.12

Bow pulpit (poor drawing)

01.05

Appears to be a duplicate of 01.03

03.13

Rig layout with "135% and 150% spinnaker" line (?)

01.06

Detailed sail dimensions for many sails

03.14

Cut-away similar to 01.03

       

02.01

Interior Bulkhead Locations

04.01

"Under Deck" chainplate - aft lower

02.02

Interior B Floor Timers (and keel bolts)

04.02

Holding tank (not likely built this way!)

02.03

Interior B Details - (lockers & such)

04.03

Mast Step support - steel plate (not shown in place)

02.04

Wiring "Loom" - just line drawings

04.04

LPG Tank hold-down & approximate location

02.05

Toe Rail details - one section, with dimensions

04.05

Table mounting rod

02.06

Deck Hardware Layout

04.06

Table hinge slide

02.07

Deck Hardware - similar to 02.06

04.07

Electrical Schematic

02.08

Plumbing General Arrangement drawing

04.08

Thru Hull Locations

02.09

General Arrangement - Wiring layout

04.09

Backstay Chainplate Location (Divided backstay)

02.10

Edson Pedestal & Emergency tiller drawing

04.10

Fuel Tank Assembly

02.11

Edson steering details and specs

04.11

Table Blank (wood dimensions

02.12

Keel Floors and mast step area - iron keel

04.12

Sink Drain Assembly

02.13

Keel Floors and mast step area - lead keel

04.13

indow location details

02.14

Deck reinforcing plywood arrangement

04.14

Hull to Deck Connection

02.15

Keel Skeg & timber

04.15

Aft Quarter-berth engine inspection opening

02.16

Wooden cradle dimensions

04.16

"Section Thru Sta 1" (anchor locker bulkhead)

02.17

(Unreadable)

04.17

Head Plan - Wood Interior

   

04.18

Exhaust System Assembly

03.01

Engine Installation Yanmar 3HMF

04.19

Head Intake & Drain Assembly

03.02

Chainplate locations - FREEPORT!

04.20

Automatic Bilge Pump Assembly

03.03

Engine Installation Yanmar 3HMF - V drive

04.21

(Duplicate of 04.18)

03.04

Interior B Bulkhead Locations

04.22

(Duplicate of 04.12)

03.05

Chainplate Locations

04.23

Manual Bilge Pump Assembly

03.06

Water Tanks assembly

04.24

Hot & Cold Pressure (water) System

03.07

Boom & Mainsheet Asembly

04.25

Water Heater Install

03.08

Port Fold-out "Queen" bunk details

   

 

Compiled 2/20/07